Technical Parameters
10M 120W SOLAR LED STREET LIGHT:
Power | 120W |
|
Material | Die-cast Aluminum | |
LED Chip | Philips 3030 | |
Light Efficiency | >100lm/W | |
CCT: | 3000-6000 | |
Viewing Angle： | 120° | |
IP | 65 | |
Working Environment: | 30℃~+70℃ |
MONO SOLAR PANEL:
Module | 2*180W |  |
Encapsulation | Glass/EVA/Cells/EVA/TPT | |
Efficiency of solar cells | 18% | |
Tolerance | ±3% | |
Voltage at max power(VMP) | 38V | |
Current at max power(IMP) | 5.13A | |
Open circuit voltage(VOC) | 43V | |
Short circuit current(ISC) | 5.54A | |
Diodes | 1by-pass | |
Protection Class | IP65 | |
Operate temp.scope | -40/+70℃ | |
Relative humidity | 0 to 1005 |
Warranty: PM is not less than 90% in 10 years and 80% in 15 Years
BATTERY
Rated Voltage | 12V |
| |
Rated Capacity | 2* 100 Ah（10 hr, 1.80 V/cell, 25 ℃） | ||
Approximate Weight(kg,±3%) | 8 KG*2 | ||
Terminal | Cable（4.0mm²×2 m） | ||
Maximum Charge Current | 20 A | ||
Ambient Temperature | -35~55 ℃ | ||
Dimension | Length (mm,±3%) | 560mm | |
Width (mm,±3%) | 1470mm | ||
Height (mm,±3%) | 106mm | ||
Case | ABS | ||
Warranty:3years
20A 24V SOLAR CONTROLLER:
Rated working voltage | 20A DC24V |  |
Max. discharging current | 20A | |
Max. charging current | 20A | |
Output voltage range | Max panel/ 24V 300WP solar panel) | |
The precision of constant current | ≤3% | |
Constantcurrentefficiency | 96% | |
levels of protection | IP67 | |
no-load current | ≤5mA | |
Over-charging voltage protection | 24V | |
Over-discharging voltage protection | 24V | |
Exit over-discharging voltage protection | 24V | |
Turn on voltage | 2~20V | |
Size | 60*76*22MM | |
Weight | 168g |
Warranty:3years
POLE:
Material | Q235 |
|
Height | 10M | |
Diameter | 100/190mm | |
Thickness | 4.0mm | |
Light Arm | 60*2.5*1500mm | |
Anchor Bolt | 4-M22-1000mm | |
Flange | 400*400*20mm | |
Surface Treatment | Hot dip galvanized + Powder Coating | |
Warranty | 20 Years |
INSTALLATION PROJECT:
EXHIBITION SHOW
Packing & Shipment
