The five major characteristics of solar streetlights for solar streetlight manufacturers:

- Mar 14, 2019 -


First. Aluminum radiator and product structure design

The design is novel, the structure is clever, full of modern atmosphere, in line with the trend of the times. In the heat dissipation, we creatively adopted the air convection cavity type aluminum radiator design scheme. The radiator has two layers of heat dissipation surfaces, and the middle is connected by eight vertical reinforcements. It is transparent before and after, and there are air convection holes on the left and right sides, which enhances the air circulation inside the cavity, which is beneficial to the heat discharge, thereby effectively improving the heat conduction efficiency of the LED light source. The above unique thermal design ensures a safe operating temperature of high power LED sources below 45 °C.


Second, the design of metal bolt type high power LED light source

Independently developed and designed a metal bolt-type high-power LED light source. In order to improve the stability of our products, we have adopted high quality imported from the United States.

 The LED light-emitting chip of the LED street lamp directly encapsulates the LED light-emitting chip on the top of the nut of the metal bolt. When the product is assembled, the LED metal bolt is directly screwed on the aluminum heat sink, thereby effectively integrating the LED and the heat sink. As one, the traditional high-power LED light source is changed by the thermal conductive silica gel, which greatly improves the heat conduction efficiency between the LED and the aluminum heat sink, and effectively ensures that the service life of the LED light source is more than 60,000 hours. At the same time, Taiwan's high-quality phosphor is used to make the brightness of a single LED reach 80 lumens or more; and there are multiple color temperatures to choose from, which can meet the different color temperature requirements of different occasions.


Third, the design of secondary optical system and light distribution curve

A unique secondary optical lens module and a "band spot" light extraction design. The length of the spot is determined by the angle of the LED light, so that the light distribution is reasonably controlled, the waste of the light is avoided, the light loss is reduced, and the band-like spots between the light poles are connected to each other, so as to meet the national standard. Various brightness indicators. Eliminates LED glare and protects LED light sources while ensuring ideal road illumination and uniformity.


Fourth, the optimization design of the drive circuit

DC 9V—30V or mains AC 84V—264V wide voltage input drive circuit design. Accurate constant current output enables each high-power LED light source to operate at a constant rated current, with low line loss and aging coefficient, and electrical conversion efficiency ≥85%. The precise constant current output ensures the service life of the LED light source.


Fifth, the modular design of LED light source

The light source adopts a modular design scheme to achieve the best match between ground illumination and power. By increasing or decreasing the number of light sources, it can meet different road width and illumination requirements, and achieve the purpose of satisfying the lighting requirements of the city without wasting power.