Led Street Light Shopping Points

- Feb 27, 2019-

affe3274389c7fb167d6ed419de69abe1, Luminous efficiency


The technology is becoming more and more mature, and the high-power LED light source can meet the needs of general street lamps. The general high-pressure sodium lamp has a luminous efficiency of 100LM/W, and the commonly used high-power LED is 50-60LM/W. With foreign LED chips, it can reach 80LM/ W, the higher the luminous efficiency, the better the energy saving effect, which is one of the most important indicators for selecting LED street lamps. However, LED standards are not clearly defined in this standard, so it must be carefully confirmed when purchasing LED street lamps.


2, Light decay


Some businesses, in order to reduce costs, use hundreds of low-power LEDs of 0.5W. However, the light decay of this low-power LED is very serious, and its lifetime of light decay to 80% is only 1000 hours. Therefore, as a street lamp that needs long-term use, it is absolutely impossible to use such a low-power LED. High-power LED (generally 30W or more) is selected, and its light decay is much better.


3, Self-weight problem


Due to the high technical content and complex composition of LED street lamps, some high-power lamp holders will weigh far more than ordinary high-pressure sodium lamps, so the requirements for the corresponding supporting materials are higher. However, some LED street lamp manufacturers have reduced the weight of the LED lamp head as much as possible, from about 30 kilograms of the original single lamp head to more than 10 kilograms, and the weight reduction has further declined.


4, Heat dissipation


LED is a semiconductor component, and its wafer is affected by temperature and reduced to 30% of the initial luminous flux, it will lose the meaning of illumination, that is, the end of life, theoretically, the life of high-power LED street lamp is 30,000-50,000 hours, but The important premise is that it has good heat dissipation. It is worth mentioning that the domestic manufacturers have adopted the world's leading needle cooling technology.